MONITOR AUDIO MASS W200 SUBWOOFER
POA
FREE DELIVERY* T&C'S APPLY WITHIN NEW ZEALAND
The W200 is a powder keg for bass, primed with the precision-crafted ordinance of twin drivers and a potent 220W DSP controlled Class D amplifier. It powers a side-firing 10” long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10” Auxiliary Bass Radiator (ABR), the two working in tandem to generate the output and scale normally associated with ported designs, but with the fast accurate transient response of a sealed box. Select ‘music’, ‘movie’ and ‘impact’ pre-set response curves using a back-panel switch.
- C-CAM cone technology
- 10” flat ABR (Auxiliary Bass Radiator)
- Tuned for tight, fast bass punch
- 220watt class-D power amplifier
- DSP providing accurate filter characteristics
- Advanced limiters designed to ensure the W200 never loses control.
- 3 x pre-set bass modes (Music, Movie, Impact)
- 12V trigger input – ensures W200 switches on and off with other equipment.
- Heavy duty MDF construction
- Discreet black cloth finish.
Item |
Value |
|---|---|
| System Format | Active sub-woofer system - Auxilary (ABR) loading. 18mm MDF cabinet (CARB2 approved) |
| Low Frquency Limit | 30Hz (-6dB) |
| Upper frequency limit | Variable 40 - 120Hz @ 24dB/Octave |
| Amplifier Power Output | 220 watts @ 1% THD+N |
| Amplifier Classification | Class - D amplifier with Switch mode power supply (SMPSU) |
| Bass EQ Switch | Music / Movie / Impact |
| Phase Control | 0-180 degrees |
| Auto Sensing | Line Level >3.5mmV |
| Input Level Requirements | Standby after approx. 20 minutes if no signal sensed |
| Driver Compliment |
1 x 10" (250mm) C-CAM® Long Throw Driver |
| Input Impendence | > 20K Ohms |
| Mains input voltage | 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present) |
| Dimensions (H x W x D) (Including grilles and feet) |
420 x 385 x 385 mm / 169/16 x 163/16 x 163/16 Inches |
| Connections | Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack) |
| 12v Trigger input | 5 12v via 3.5 via mono mini-jack socket |
| Power Consumption | 200 watts / 0.5 watts in Standby (ErP approved) |
| Weight | 15.96Kg (35lb, 2oz) |
Share this item: